Wednesday, January 28, 2015

THAT Rhett Bastid.... the comic!

Coming in the not too distant future to a blogspot near you....

                                                                Pbbbbbbbt!

Cheers Ya'll! ;)

Monday, January 26, 2015

An Incident in the Powder Room

There comes a time during cold/flu season when sane people should realize they aren't functioning correctly and just go lay down. However, a great many of us carry on with work,school or other chores because we "have to"...like using weathering powders. Needless to say, the Hulk was displeased with my initial effort...


 ....then again.... not much really pleases the guy anyways, except "smash"-ing. So, ya know what?... jog on, Hulkster its nothing I can't fix when I'm not sick.

For those of you that have tried your hand at weathering powders, you know there are "tricks". One of my favorites involved Isopropol Alcohol as a fixing agent. It makes a kind of watercolory/gouache thing out of the powders....that I could likely get much cheaper by just using friggin' gouache... but hey, I gotta have the cool toys too.  So, while it may not look totally terrible to some (and may look just AWESOME to others) the results were definitively NOT what I was after. There are some good spots and many not-so-good, yet not unfixable.   First, a little comparison with the "unspoiled" Rhino...


What I don't want is the HUGE block of orangy/red blah on the door, but the wierd little "water spot" of violet is actually intriguing.  The sand texture underneath is meant to be sort of organic, so the plan is to break some of the red/orange with some of the purple/fleshy/pinks of the upper hull gribblies once I paint them.  I'll break the rest up with some sponged black/brown.  Most of the rest of the hull aft of the door is pretty good and with a little detailing here and there will be done. Compared to the Rhino, which is where the Vindicator was before I got "wild with the powder" while on cold meds.

The other victim of "Man, that's just a big Spa-LATCH of flat color!" was the plow blade.  Partly due to a poorly executed application of Alcohol and finished off by the dullcoat spray fixative.


Again, a few interesting areas, but largely a redo or re-detail.  Here's a look at both sides, so you can see all the nits I'll be picking at for my next or a future post, because I may have to step off this model for a bit and build something to "clean my eyeballs".


I know, I know!  I could be a bit less of a crazy person over these things, but in all honesty, my dear friends, I've come to the painful realization of late that I am no longer a Warhammer 40k gamer. I .... am a hobbyist.  I have yet to play a game of 7th edition (partly due to scheduling and partly due to being stood up when I do find an opponent via my LGS websites). I'm not quitting.  I have a TON of unbuilt models and my wife said she'd kill me if I sold them for what they would fetch on the market these days.  So....I must build them.  I must build them all.  And have fun doing it.

THEREFORE... I might as well give these models the same kind of semi-psychotic scrutiny as I do any other piece of artwork I do. ;)

Just a side note, I'm going to get my art blog back up and running which means comics one of which will be about the Templars of DOOooom. No actual launch date yet, because I don't want to jinx myself, but the plan is instead of posting as I draw them this time and being horribly sporadic, to get a few a head and post monthly or bi-weekly so ya'll can get a chuckle and follow the storylines.  Personally, I like April Fool's day as a goal, but then no one will believe I'm actually going to do it if I say I'm going to do it.

Cheers ya'll!

Thursday, January 15, 2015

Missed it by THAT much...

...who am I kidding, I needed about 4 more days. Abject failure for the Call of Chaos VII painting challenge. Well, at least when it comes to the dead line. 

As for the Vindicator, I started the gribblies and nasty deamonic infected parts. Here they are primed and washed in purple,crimson and some green.

I worked on the Rhino while waiting for washes to dry.  Here's a great shot that shows the difference in the two post and pre-washes..


Somewhere along the way, working around all this Nurgly stuff brought me the "blessing" of a flu-like evil thing (or, more likely, the wife carried it home from those little plaguebearers she teaches at school)   The time I've lost (so far) I probably could have finished both vehicles before the deadline... but here they stand.  Close, but not totally finished.

The Vindicator....


And the Rhino....




Still lots of detailing,weathering and tentacly gribblies to finish on both of them.  The 10 Plaguebearers are at Stage 2 , they still need highlighting and detailing.


One of these days, I'll do a painting challenge and remember how terribly slow I paint.  But, I'll be finishing these projects up. The vehicles are definitely priority 1. The Plaguebearers will likely be the side project I work on while I'm waiting for greenstuff or paint to dry. That's all for now.

Cheers Ya'll!


Monday, January 12, 2015

Green Tanks and Rats

After a mind-numbing series of little brush strokes and one green after another. The Green on the Vindicator is DONE.... 


The top is the completed treatment from the last post, with some shading (Druchii Purple Wash)  Then, a couple washes - one overall, one to darken areas with the same downward stroke technique- of good ol' Althonian Camoshade and BAM.... greens are done.  Not on to the organic bits and the rusting/weathering.  I still have a Rhino and some Plaguebearers to finish by Thursday. Lots of painting the next two days. I'm kind of going into the old college all- nighter mode. And frankly, I'm kind of loving it...aside from my wife's vehicle deciding to break in the middle of it all.

One of the conversion projects that will happen after this painting challenge (besides finishing Ms. Charlotte) will be to make some nasty,Nurgly Obliterators from Rat Ogres.  I have 4 from the Island of Blood set and plan to get 1 box of the new nasty ones when they come out. Damn you, GW for making me buy more miniatures!  But...it will be a very Nurgly 7 total. I've been going to an artist get together of late and took this guy with me as a reference....


And came up with something like this for a concept sketch...


Well, that's it for now. I'll have another post later in the week - no matter what level of success, on the Call of Chaos painting challenge group.

Cheers Ya'll!

Saturday, January 10, 2015

I may just have found.....

..... my new Obliterators.


Yeeeeaaaaah <wrings hands> those guys would be perrrrrrfect! I think they will make a great base for the conversion into weapon beasts.  There's a better chance of a head with a big eye (think Blinky) rather than rat heads. OH the things I can do.  AND  I have 4 more from the Blood Isle sprues.

 More progress on the tanks with a painting session planned for tonight and tomorrow. I'll post some pics Sunday night.

Cheers ya'll!

Wednesday, January 7, 2015

Tanks for stoppin' by!

No, really. Tanks!  Now that the holiday madness is past and the new calendar year scooting right along, I find myself up against a deadline. My Call of Chaos pledge over at THE Bolter and Chainsword is due soon. Very soon.  As in 7 days.  It was like a ninja, snuck right up on me. This dawning on me (like yesterday, when I put up a new calendar in my art/hobby room) has kicked me into overdrive.  I have 2 vehicles and 10 plaguebearers left to finish. On to the models.....


The Rhino and the Vindicator "primed". Really, primed red brown, then washed with a brown/black. In the Rhino's case I had started painting it a couple years back and didn't like the paint scheme so I gave it a wash with the brown/black as well.  The next step was beginning the layers of greens that would make up the hull color. First, GW Castellan Green.


I used a #6 Flat brush for pretty much everything, usually applying the paint in downward strokes or even thinned dabs. The big thing was getting coverage, but letting some of the brown tones show through in certain places and also for a bit of that war-weary look.  The sad part is, in the long run a good deal of the greens I'm agonizing over will be covered with corruption, rust or weathering. The next step was highlight layers. GW Death World Forest was the first layer in an overall run to bring out edges and add character to the green.


From the side door back you can see the 3rd color, GW Gretchin Green. You can also see the streaky brush application I was talking about.  The 4th step is even more highlights withe GW Ogryn Camo and Bleached Bone. You can see my steps #2- #4 in the next photo.


The plan, once I get that done on both vehicles, is to weather up the greens a bit, do an overall wash with GW Althonian Camoshade...uh,er...just because, and then move on to laying in the major rust areas.  Much more to come, because I aim to meet that deadline. Its good to be back. :)

Cheers ya'll!